All insights

EHS & Compliance

Noise Exposure Limits at Work in India: Measurement, Controls and Audiometry

Noise limits under Indian factory rules: permissible exposure hours, survey methodology, engineering controls, hearing conservation programmes and audiometric testing records.

Sustaira Advisory/5 Nov 2026/8 min read

Noise-induced hearing loss is gradual, permanent and entirely preventable — which is why it remains one of the most commonly cited health violations in Indian factories even though the controls are well known. The rules set permissible exposure by duration, the survey method determines whether you are in breach, and the control hierarchy — elimination, engineering, administrative, protection — decides how expensive compliance will be. This guide covers all three, plus the audiometric evidence that ties them together.

The limits and how they work

Indian factory rules set a permissible noise level of 90 dBA as an eight-hour time-weighted average, with the allowable duration halving for every 5 dBA increase — 8 hours at 90, 4 at 95, 2 at 100, and so on — and an absolute ceiling at 115 dBA regardless of duration. Where exposure exceeds the limit, the rules require practicable dampening or enclosure, and hearing protectors must be provided and their use enforced. Some states and central rules specify lower action levels; the survey result, not the rule text alone, determines your obligation.

Running a credible survey

A noise survey measures time-weighted exposure per person or per zone using a calibrated sound level meter with A-weighting and slow response, across the full shift including breaks in the noisy area — because workers do not leave the line for the whole day. Map the site: zones above the limit, the affected job titles, and the equipment contributing. The survey needs a competent person, calibration records before and after, and a date — a survey without calibration certificates is challenged immediately. Re-survey after any significant equipment change or control installation; noise maps decay as plant changes.

Controls that actually reduce exposure

Start with the source: replace loose, rattling or unbalanced components — often the cheapest fix on the list. Then the path: enclosures on compressors and blowers, lagging on steam vents, damping of sheet-metal panels and doors, and silencers on exhausts. Then the receiver: job rotation to cap individual exposure, barriers between the noisy machine and the operator position, and maintenance schedules that prevent the slow drift into noisier operation. Hearing protection is the last layer, not the first — earplugs and muffs work only when selected for the measured level, fitted properly and actually worn, which requires a programme, not a dispenser on the wall.

```chart {"type":"bar","title":"Where noise exposure exceeds limits (multi-plant survey)","unit":"% workers exposed","data":[{"label":"Blowers & compressors","value":27},{"label":"Presses & stamping","value":22},{"label":"Grinding & finishing","value":18},{"label":"Generator rooms","value":14},{"label":"Packing lines","value":11},{"label":"Other","value":8}]}

Hearing conservation programme

A complete programme has six parts: the survey, controls with a tracked action plan, protectors with fit testing, audiometry for exposed workers — baseline within joining and periodically thereafter, training on both risk and correct protector use, and recordkeeping that ties all five together. The audiometric record is the health evidence: a baseline followed by periodic tests lets you detect a threshold shift in an individual before it becomes disability, and lets you demonstrate that the programme is preventing loss rather than documenting it. Referral to an occupational health physician for any confirmed shift closes the loop.

Enforcement and evidence

Inspectors ask for the survey with calibration, the zone map, the control action plan, the protector issue records and the audiometry summaries. The frequent findings: a survey older than the plant's equipment, exposure zones where the protector issue record shows no distribution, and audiometry that exists as a one-time camp with no baseline comparison. The first is cheap to fix — a re-survey — the second and third need a system, which is the hearing conservation programme above.

Sequencing the investment

For a plant with several zones above the limit: survey and map first, close the no-cost fixes (maintenance, damping, rotation) immediately, then prioritise enclosures by exposed headcount multiplied by exposure level, and stand up audiometry in parallel because it takes months of data to become valuable. The programme's credibility comes from the combination — measurement, control and health surveillance telling the same story.

If you have never run a calibrated survey, or your audiometry is a one-off camp record, our occupational health and EHS team runs the full sequence — survey, controls plan, protector programme and audiometric baseline.

EHS & Compliance

Talk to the author of this insight

Bring your site conditions and current compliance position. We will translate “Noise Exposure Limits at Work in India: Measurement, Controls and Audiometry” into a scoped audit, ESG or training plan for your operation.

  • A senior engineer — not a salesperson — responds within one business day
  • Indicative scope, timeline and fee with no obligation
  • Confidential review; site data is never shared

We reply within one business day. Your details stay with our practice team.